VIENPost an adPost ad

Exam prepEnhancements: acrylic, gel, dip, tips, wraps

Enhancements: acrylic, gel, dip, tips, wraps

30 questions · Page 1 of 2

Practice questions written by Chợ Nail from general nail-technology knowledge. They are not the state’s exam questions and have not been reviewed by a licensed instructor. Use your school’s book and the board’s candidate bulletin as the authority.

Practise this page’s 20 questions

Question 1 of 200 ✓

The part of a nail tip that is glued to the natural nail is the:

Every question on this page, with its answer

  1. The part of a nail tip that is glued to the natural nail is the:

    Phần của móng tip được dán lên móng thật là:

    • AWell (contact area)Phần lõm tiếp xúc (well, contact area)✓ Answer
    • BApexĐiểm cao nhất (apex)
    • CSmile lineĐường cười (smile line)
    • DFree edgeĐầu móng

    Why: The well is the thinner, recessed area where the tip meets the nail plate.Well là phần mỏng, lõm, nơi tip tiếp xúc với bản móng.

  2. A correctly sized nail tip should fit:

    Móng tip đúng cỡ phải vừa:

    • AOnly the centre of the nailChỉ phần giữa móng
    • BFrom sidewall to sidewall without being forcedTừ thành móng bên này sang bên kia mà không phải ép✓ Answer
    • CWider than the fingerRộng hơn ngón tay
    • DAny nail, with enough glueMóng nào cũng được, miễn đủ keo

    Why: A tip that is too narrow or pressed flat will crack or lift.Tip quá hẹp hoặc bị ép dẹp sẽ nứt hoặc bong.

  3. A nail tip should generally cover no more than:

    Móng tip nói chung không nên phủ quá:

    • AThe eponychiumPhần eponychium
    • BThe skin of the sidewallsPhần da hai bên
    • CAbout half of the natural nail plateKhoảng một nửa bản móng thật✓ Answer
    • DThe whole nail plate and the cuticleCả bản móng và cuticle

    Why: Leaving most of the plate exposed gives the overlay a natural nail to bond to.Để lộ phần lớn bản móng cho lớp phủ có móng thật để bám.

  4. A nail tip worn without any overlay is:

    Móng tip đeo mà không có lớp phủ thì:

    • AWeak and likely to breakYếu và dễ gãy✓ Answer
    • BSelf-curingTự đông cứng
    • CPermanentVĩnh viễn
    • DStronger than acrylicChắc hơn acrylic

    Why: The overlay (acrylic, gel or wrap) gives the tip its strength.Lớp phủ (acrylic, gel hoặc wrap) mới tạo độ chắc cho tip.

  5. A nail form is used to:

    Khuôn móng (nail form) dùng để:

    • ARemove gel polishTháo sơn gel
    • BMeasure the lamp’s lightĐo ánh sáng đèn
    • CPush back the cuticleĐẩy da
    • DExtend the nail by sculpting product past the free edgeNối dài móng bằng cách đắp sản phẩm vượt ra ngoài đầu móng✓ Answer

    Why: The form sits under the free edge as a guide and support for the extension.Khuôn đặt dưới đầu móng làm đường dẫn và đỡ cho phần nối.

  6. The apex of an enhancement is:

    Điểm apex của móng đắp là:

    • AThe highest point, placed over the stress area for strengthĐiểm cao nhất, đặt trên vùng chịu lực để móng chắc✓ Answer
    • BThe underside of the nailMặt dưới của móng
    • CThe thinnest point at the cuticleĐiểm mỏng nhất ở gốc móng
    • DThe edge of the tipMép của tip

    Why: Extra thickness at the apex supports the part of the nail that takes the most stress.Độ dày thêm ở apex nâng đỡ phần móng chịu lực nhiều nhất.

  7. The stress area of a nail is:

    Vùng chịu lực (stress area) của móng là:

    • AThe matrixMầm móng
    • BThe skin of the fingertipDa đầu ngón tay
    • CWhere the natural nail grows past the finger and becomes the free edgeNơi móng thật mọc vượt khỏi ngón tay và trở thành đầu móng✓ Answer
    • DThe lunulaLiềm móng

    Why: Breaks most often start here, so the enhancement is built strongest over it.Móng thường gãy từ đây, nên lớp đắp phải chắc nhất ở vùng này.

  8. Near the cuticle and sidewalls, enhancement product should be:

    Gần cuticle và hai bên thành móng, sản phẩm đắp nên:

    • AFlooded over the skinTràn lên da
    • BLeft as a raised ledgeĐể thành gờ nổi
    • CThin and flush with the nail, not touching the skinMỏng, liền với móng và không chạm da✓ Answer
    • DThick, to hide the growth lineDày để che đường móng mọc

    Why: Product on the skin causes lifting and can lead to allergy.Sản phẩm dính da gây bong và có thể dẫn đến dị ứng.

  9. Lifting of an enhancement is most often caused by:

    Móng đắp bị bong thường do:

    • AUsing a top coatDùng sơn phủ
    • BA short free edgeĐầu móng ngắn
    • CPoor nail preparation or product touching the skinChuẩn bị móng không kỹ hoặc sản phẩm chạm da✓ Answer
    • DToo much hand washing by the clientKhách rửa tay quá nhiều

    Why: Oil, moisture or cuticle left on the plate stops the product from bonding.Dầu, độ ẩm hoặc cuticle sót trên bản móng làm sản phẩm không bám.

  10. What should be done with lifted product at a fill (rebalance)?

    Khi dặm (fill, rebalance), phần sản phẩm bị bong nên được xử lý thế nào?

    • ANip it off with nippersBấm bỏ bằng kềm
    • BFill over itĐắp phủ lên
    • CFile it away gently until only well-bonded product remainsDũa nhẹ cho đến khi chỉ còn phần bám chắc✓ Answer
    • DGlue it back downDán keo lại

    Why: Nipping can lift more product and damage the natural nail; sealing over a gap traps moisture and bacteria.Bấm bỏ có thể làm bong thêm và hại móng thật; đắp lên khe hở sẽ giữ lại ẩm và vi khuẩn.

  11. A fill (rebalance) is needed because:

    Cần dặm (fill, rebalance) vì:

    • AThe natural nail grows and moves the balance of the enhancement forwardMóng thật mọc ra làm điểm cân bằng của móng đắp dịch về trước✓ Answer
    • BThe product meltsSản phẩm bị chảy
    • CThe lamp weakensĐèn yếu đi
    • DPolish removes the acrylicSơn làm mất acrylic

    Why: Regular maintenance fills the new growth and restores the apex; the product’s maker gives the timing.Bảo dưỡng định kỳ lấp phần móng mới mọc và dựng lại apex; nhà sản xuất cho biết thời gian.

  12. The safest way to remove acrylic enhancements is to:

    Cách an toàn nhất để tháo móng acrylic là:

    • APull them off quicklyGiật ra nhanh
    • BClip them off with nippersBấm bỏ bằng kềm
    • CPry them off with a toolCạy ra bằng dụng cụ
    • DSoak them in the remover the manufacturer recommends until they softenNgâm trong dung dịch tháo nhà sản xuất khuyên dùng cho đến khi mềm✓ Answer

    Why: Prying or pulling tears layers off the natural nail plate.Cạy hoặc giật làm tróc các lớp của bản móng thật.

  13. Over-filing the natural nail during preparation can cause:

    Dũa móng thật quá mức khi chuẩn bị có thể gây:

    • ABetter adhesion for lifeBám tốt suốt đời
    • BA thin, weak and sensitive nail plateBản móng mỏng, yếu và nhạy cảm✓ Answer
    • CA thicker nailMóng dày hơn
    • DFaster curingĐông cứng nhanh hơn

    Why: Only the shine is removed; aggressive filing damages the plate.Chỉ cần làm mất độ bóng; dũa mạnh sẽ làm hại bản móng.

  14. A “bead” in acrylic application is:

    “Viên bi” (bead) trong đắp acrylic là:

    • AA type of nail tipMột loại móng tip
    • BThe ball of product formed when a wet brush picks up powderViên sản phẩm hình thành khi cọ ướt lấy bột✓ Answer
    • CA bubble in the top coatBọt khí trong sơn phủ
    • DA decoration glued on topHạt trang trí dán lên trên

    Why: The size and wetness of the bead control how the product is placed and how strong it is.Kích cỡ và độ ướt của viên bi quyết định cách đặt sản phẩm và độ chắc.

  15. Odourless monomer-and-polymer products typically:

    Sản phẩm monomer và polymer không mùi thường:

    • ACure more slowly and leave a tacky layer to be filed offĐông cứng chậm hơn và để lại lớp dính phải dũa bỏ✓ Answer
    • BCannot cause allergyKhông thể gây dị ứng
    • CNeed no ventilationKhông cần thông gió
    • DAre removed with waterTháo bằng nước

    Why: “Odourless” does not mean vapour-free or harmless; the same precautions apply.“Không mùi” không có nghĩa là không có hơi hay vô hại; vẫn phải áp dụng các biện pháp an toàn.

  16. Hard gels are different from soak-off gels because hard gels:

    Gel cứng (hard gel) khác gel ngâm tháo (soak-off gel) ở chỗ gel cứng:

    • AWash off with soapRửa sạch bằng xà phòng
    • BCure without a lampĐông cứng không cần đèn
    • CMust be filed off, since they do not dissolve in removerPhải dũa bỏ vì không tan trong dung dịch tháo✓ Answer
    • DAre a kind of polish removerLà một loại nước tẩy sơn

    Why: Soak-off gels soften in acetone-type removers; traditional hard gels do not.Gel ngâm tháo mềm ra trong dung dịch tháo dạng acetone; gel cứng truyền thống thì không.

  17. To cure gel properly, the layers should be:

    Để gel đông cứng đúng, các lớp nên:

    • ALeft to air dryĐể khô tự nhiên
    • BCured under any lamp for a few secondsHơ dưới đèn bất kỳ vài giây
    • CThin, and cured for the time and with the lamp the manufacturer statesMỏng, và hơ đèn đúng thời gian, đúng loại đèn nhà sản xuất ghi✓ Answer
    • DAs thick as possible, cured onceDày hết mức, hơ một lần

    Why: Light cannot reach the bottom of a thick layer, leaving uncured gel next to the nail.Ánh sáng không tới được đáy của lớp dày, để lại gel chưa đông cứng sát móng.

  18. If a client feels a burning “heat spike” under the lamp, they should:

    Nếu khách thấy nóng rát (heat spike) dưới đèn, họ nên:

    • AKeep the hand in no matter whatCứ để tay trong đèn
    • BBlow on the nails inside the lampThổi vào móng trong đèn
    • CWipe the gel off with waterLau gel bằng nước
    • DTake the hand out for a moment, then continue curingRút tay ra một lát rồi hơ tiếp✓ Answer

    Why: Pausing slows the reaction; applying thinner layers prevents the problem.Dừng lại làm phản ứng chậm đi; đắp lớp mỏng hơn sẽ tránh được việc này.

  19. Which fabric is used for nail wraps?

    Loại vải nào dùng cho móng bọc (wrap)?

    • ACotton woolBông gòn
    • BPaper towelKhăn giấy
    • CSilk, linen or fibreglassLụa (silk), lanh (linen) hoặc sợi thủy tinh (fibreglass)✓ Answer
    • DPlastic filmMàng nhựa

    Why: The fabric is bonded with wrap resin to strengthen or repair the nail.Vải được dán bằng nhựa wrap để làm chắc hoặc sửa móng.

  20. Compared with silk, linen wraps are:

    So với lụa, wrap bằng vải lanh (linen):

    • AMade of glassLàm bằng thủy tinh
    • BThicker and stronger, but more visible on the nailDày và chắc hơn, nhưng lộ rõ hơn trên móng✓ Answer
    • CThinner and nearly invisibleMỏng hơn và gần như không thấy
    • DCured under a lampĐông cứng dưới đèn

    Why: Linen is opaque, so it is usually covered with coloured polish.Vải lanh đục nên thường phải sơn màu phủ lên.