VIENĐăng tinĐăng tin

Ôn thiMóng đắp: acrylic, gel, dip, tip, wrap

Móng đắp: acrylic, gel, dip, tip, wrap

30 câu hỏi · Trang 1 / 2

Câu hỏi luyện tập do Chợ Nail soạn từ kiến thức chung về nghề nail. Đây không phải câu hỏi thi của tiểu bang và chưa được giáo viên có giấy phép duyệt. Hãy lấy sách của trường và tài liệu hướng dẫn thí sinh (candidate bulletin) của hội đồng làm chuẩn.

Luyện 20 câu của trang này

Câu 1 / 200 ✓

Phần của móng tip được dán lên móng thật là:

The part of a nail tip that is glued to the natural nail is the:

Tất cả câu hỏi của trang này, kèm đáp án

  1. Phần của móng tip được dán lên móng thật là:

    The part of a nail tip that is glued to the natural nail is the:

    • APhần lõm tiếp xúc (well, contact area)Well (contact area)✓ Đáp án
    • BĐiểm cao nhất (apex)Apex
    • CĐường cười (smile line)Smile line
    • DĐầu móngFree edge

    Vì sao: Well là phần mỏng, lõm, nơi tip tiếp xúc với bản móng.The well is the thinner, recessed area where the tip meets the nail plate.

  2. Móng tip đúng cỡ phải vừa:

    A correctly sized nail tip should fit:

    • AChỉ phần giữa móngOnly the centre of the nail
    • BTừ thành móng bên này sang bên kia mà không phải épFrom sidewall to sidewall without being forced✓ Đáp án
    • CRộng hơn ngón tayWider than the finger
    • DMóng nào cũng được, miễn đủ keoAny nail, with enough glue

    Vì sao: Tip quá hẹp hoặc bị ép dẹp sẽ nứt hoặc bong.A tip that is too narrow or pressed flat will crack or lift.

  3. Móng tip nói chung không nên phủ quá:

    A nail tip should generally cover no more than:

    • APhần eponychiumThe eponychium
    • BPhần da hai bênThe skin of the sidewalls
    • CKhoảng một nửa bản móng thậtAbout half of the natural nail plate✓ Đáp án
    • DCả bản móng và cuticleThe whole nail plate and the cuticle

    Vì sao: Để lộ phần lớn bản móng cho lớp phủ có móng thật để bám.Leaving most of the plate exposed gives the overlay a natural nail to bond to.

  4. Móng tip đeo mà không có lớp phủ thì:

    A nail tip worn without any overlay is:

    • AYếu và dễ gãyWeak and likely to break✓ Đáp án
    • BTự đông cứngSelf-curing
    • CVĩnh viễnPermanent
    • DChắc hơn acrylicStronger than acrylic

    Vì sao: Lớp phủ (acrylic, gel hoặc wrap) mới tạo độ chắc cho tip.The overlay (acrylic, gel or wrap) gives the tip its strength.

  5. Khuôn móng (nail form) dùng để:

    A nail form is used to:

    • ATháo sơn gelRemove gel polish
    • BĐo ánh sáng đènMeasure the lamp’s light
    • CĐẩy daPush back the cuticle
    • DNối dài móng bằng cách đắp sản phẩm vượt ra ngoài đầu móngExtend the nail by sculpting product past the free edge✓ Đáp án

    Vì sao: Khuôn đặt dưới đầu móng làm đường dẫn và đỡ cho phần nối.The form sits under the free edge as a guide and support for the extension.

  6. Điểm apex của móng đắp là:

    The apex of an enhancement is:

    • AĐiểm cao nhất, đặt trên vùng chịu lực để móng chắcThe highest point, placed over the stress area for strength✓ Đáp án
    • BMặt dưới của móngThe underside of the nail
    • CĐiểm mỏng nhất ở gốc móngThe thinnest point at the cuticle
    • DMép của tipThe edge of the tip

    Vì sao: Độ dày thêm ở apex nâng đỡ phần móng chịu lực nhiều nhất.Extra thickness at the apex supports the part of the nail that takes the most stress.

  7. Vùng chịu lực (stress area) của móng là:

    The stress area of a nail is:

    • AMầm móngThe matrix
    • BDa đầu ngón tayThe skin of the fingertip
    • CNơi móng thật mọc vượt khỏi ngón tay và trở thành đầu móngWhere the natural nail grows past the finger and becomes the free edge✓ Đáp án
    • DLiềm móngThe lunula

    Vì sao: Móng thường gãy từ đây, nên lớp đắp phải chắc nhất ở vùng này.Breaks most often start here, so the enhancement is built strongest over it.

  8. Gần cuticle và hai bên thành móng, sản phẩm đắp nên:

    Near the cuticle and sidewalls, enhancement product should be:

    • ATràn lên daFlooded over the skin
    • BĐể thành gờ nổiLeft as a raised ledge
    • CMỏng, liền với móng và không chạm daThin and flush with the nail, not touching the skin✓ Đáp án
    • DDày để che đường móng mọcThick, to hide the growth line

    Vì sao: Sản phẩm dính da gây bong và có thể dẫn đến dị ứng.Product on the skin causes lifting and can lead to allergy.

  9. Móng đắp bị bong thường do:

    Lifting of an enhancement is most often caused by:

    • ADùng sơn phủUsing a top coat
    • BĐầu móng ngắnA short free edge
    • CChuẩn bị móng không kỹ hoặc sản phẩm chạm daPoor nail preparation or product touching the skin✓ Đáp án
    • DKhách rửa tay quá nhiềuToo much hand washing by the client

    Vì sao: Dầu, độ ẩm hoặc cuticle sót trên bản móng làm sản phẩm không bám.Oil, moisture or cuticle left on the plate stops the product from bonding.

  10. Khi dặm (fill, rebalance), phần sản phẩm bị bong nên được xử lý thế nào?

    What should be done with lifted product at a fill (rebalance)?

    • ABấm bỏ bằng kềmNip it off with nippers
    • BĐắp phủ lênFill over it
    • CDũa nhẹ cho đến khi chỉ còn phần bám chắcFile it away gently until only well-bonded product remains✓ Đáp án
    • DDán keo lạiGlue it back down

    Vì sao: Bấm bỏ có thể làm bong thêm và hại móng thật; đắp lên khe hở sẽ giữ lại ẩm và vi khuẩn.Nipping can lift more product and damage the natural nail; sealing over a gap traps moisture and bacteria.

  11. Cần dặm (fill, rebalance) vì:

    A fill (rebalance) is needed because:

    • AMóng thật mọc ra làm điểm cân bằng của móng đắp dịch về trướcThe natural nail grows and moves the balance of the enhancement forward✓ Đáp án
    • BSản phẩm bị chảyThe product melts
    • CĐèn yếu điThe lamp weakens
    • DSơn làm mất acrylicPolish removes the acrylic

    Vì sao: Bảo dưỡng định kỳ lấp phần móng mới mọc và dựng lại apex; nhà sản xuất cho biết thời gian.Regular maintenance fills the new growth and restores the apex; the product’s maker gives the timing.

  12. Cách an toàn nhất để tháo móng acrylic là:

    The safest way to remove acrylic enhancements is to:

    • AGiật ra nhanhPull them off quickly
    • BBấm bỏ bằng kềmClip them off with nippers
    • CCạy ra bằng dụng cụPry them off with a tool
    • DNgâm trong dung dịch tháo nhà sản xuất khuyên dùng cho đến khi mềmSoak them in the remover the manufacturer recommends until they soften✓ Đáp án

    Vì sao: Cạy hoặc giật làm tróc các lớp của bản móng thật.Prying or pulling tears layers off the natural nail plate.

  13. Dũa móng thật quá mức khi chuẩn bị có thể gây:

    Over-filing the natural nail during preparation can cause:

    • ABám tốt suốt đờiBetter adhesion for life
    • BBản móng mỏng, yếu và nhạy cảmA thin, weak and sensitive nail plate✓ Đáp án
    • CMóng dày hơnA thicker nail
    • DĐông cứng nhanh hơnFaster curing

    Vì sao: Chỉ cần làm mất độ bóng; dũa mạnh sẽ làm hại bản móng.Only the shine is removed; aggressive filing damages the plate.

  14. “Viên bi” (bead) trong đắp acrylic là:

    A “bead” in acrylic application is:

    • AMột loại móng tipA type of nail tip
    • BViên sản phẩm hình thành khi cọ ướt lấy bộtThe ball of product formed when a wet brush picks up powder✓ Đáp án
    • CBọt khí trong sơn phủA bubble in the top coat
    • DHạt trang trí dán lên trênA decoration glued on top

    Vì sao: Kích cỡ và độ ướt của viên bi quyết định cách đặt sản phẩm và độ chắc.The size and wetness of the bead control how the product is placed and how strong it is.

  15. Sản phẩm monomer và polymer không mùi thường:

    Odourless monomer-and-polymer products typically:

    • AĐông cứng chậm hơn và để lại lớp dính phải dũa bỏCure more slowly and leave a tacky layer to be filed off✓ Đáp án
    • BKhông thể gây dị ứngCannot cause allergy
    • CKhông cần thông gióNeed no ventilation
    • DTháo bằng nướcAre removed with water

    Vì sao: “Không mùi” không có nghĩa là không có hơi hay vô hại; vẫn phải áp dụng các biện pháp an toàn.“Odourless” does not mean vapour-free or harmless; the same precautions apply.

  16. Gel cứng (hard gel) khác gel ngâm tháo (soak-off gel) ở chỗ gel cứng:

    Hard gels are different from soak-off gels because hard gels:

    • ARửa sạch bằng xà phòngWash off with soap
    • BĐông cứng không cần đènCure without a lamp
    • CPhải dũa bỏ vì không tan trong dung dịch tháoMust be filed off, since they do not dissolve in remover✓ Đáp án
    • DLà một loại nước tẩy sơnAre a kind of polish remover

    Vì sao: Gel ngâm tháo mềm ra trong dung dịch tháo dạng acetone; gel cứng truyền thống thì không.Soak-off gels soften in acetone-type removers; traditional hard gels do not.

  17. Để gel đông cứng đúng, các lớp nên:

    To cure gel properly, the layers should be:

    • AĐể khô tự nhiênLeft to air dry
    • BHơ dưới đèn bất kỳ vài giâyCured under any lamp for a few seconds
    • CMỏng, và hơ đèn đúng thời gian, đúng loại đèn nhà sản xuất ghiThin, and cured for the time and with the lamp the manufacturer states✓ Đáp án
    • DDày hết mức, hơ một lầnAs thick as possible, cured once

    Vì sao: Ánh sáng không tới được đáy của lớp dày, để lại gel chưa đông cứng sát móng.Light cannot reach the bottom of a thick layer, leaving uncured gel next to the nail.

  18. Nếu khách thấy nóng rát (heat spike) dưới đèn, họ nên:

    If a client feels a burning “heat spike” under the lamp, they should:

    • ACứ để tay trong đènKeep the hand in no matter what
    • BThổi vào móng trong đènBlow on the nails inside the lamp
    • CLau gel bằng nướcWipe the gel off with water
    • DRút tay ra một lát rồi hơ tiếpTake the hand out for a moment, then continue curing✓ Đáp án

    Vì sao: Dừng lại làm phản ứng chậm đi; đắp lớp mỏng hơn sẽ tránh được việc này.Pausing slows the reaction; applying thinner layers prevents the problem.

  19. Loại vải nào dùng cho móng bọc (wrap)?

    Which fabric is used for nail wraps?

    • ABông gònCotton wool
    • BKhăn giấyPaper towel
    • CLụa (silk), lanh (linen) hoặc sợi thủy tinh (fibreglass)Silk, linen or fibreglass✓ Đáp án
    • DMàng nhựaPlastic film

    Vì sao: Vải được dán bằng nhựa wrap để làm chắc hoặc sửa móng.The fabric is bonded with wrap resin to strengthen or repair the nail.

  20. So với lụa, wrap bằng vải lanh (linen):

    Compared with silk, linen wraps are:

    • ALàm bằng thủy tinhMade of glass
    • BDày và chắc hơn, nhưng lộ rõ hơn trên móngThicker and stronger, but more visible on the nail✓ Đáp án
    • CMỏng hơn và gần như không thấyThinner and nearly invisible
    • DĐông cứng dưới đènCured under a lamp

    Vì sao: Vải lanh đục nên thường phải sơn màu phủ lên.Linen is opaque, so it is usually covered with coloured polish.